The possible values for this command are: This command sets the level of functionality in the MT: “full functionality” is where the highest level of power is drawn, and “minimum functionality” is where minimum power is drawn. In this case, for example, the driver must be set up to connect to COM5.įor this Modem, we employed AT+CFUN command to enable its use. Soon after driver installation, you will be able to check the installed interfaces at the Windows device manager. Otherwise, when you plug the modem to the machine, the option for driver installation will pop up. When you purchase the Modem, it may come with a CD that has the required drivers. You will need to add a chip that can send SMS (please refer to the chip provider for costs of this service). The Modem we used for developing this test is the ZTE MF710. To send SMS messages, you will need to fire only a few commands. You can find several sites online that will explain which AT commands are available. In summary, this driver allows Elipse E3 to send and receive Modem commands via text messages, called AT commands. To send SMS messages via Elipse E3, you will need to use the Elipse GSM driver.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |